Dry Ice Energy

Light Industry

Hospital & Clinic

HVAC hygiene cleaning is one of the most effective measures against nosocomial pathogens. Dry ice reaches ducts, grilles, VAV boxes, and filter contact surfaces without generating aerosols or shutting down the system. Sublimated CO₂ leaves no residue — no off-gassing of cleaning chemicals into sensitive patient areas, no waiting time before resuming operations.

  • No chemicals or water
  • Made in Germany
  • Service across Europe
Time saved
25–40 %
Chemicals & water
0 %
Sublimation
78 °C
Made in Germany
DE

Ventilation, HVAC, and cleanroom preparation

For cleanrooms and areas subject to validation requirements, dry ice delivers reproducibly clean surfaces — measurable by ATP bioluminescence and documentable for audit trails. The process is ESD-safe, protecting sensors and control electronics within the ventilation system.

  • Ventilation ducts and filter frames without dismantling
  • Air conditioning & VRF outdoor units: heat exchangers and housings
  • VAV/CAV boxes and control dampers during live operation
  • Cleanroom pre-cleaning before validation — ATP-documentable
  • No water deposits in the system — no mould risk
  • ESD-safe for sensors and control electronics in ventilation systems

Medical equipment housings and technical rooms

Dry ice cleans the exterior surfaces and housings of large medical equipment — MRI rooms, operating table undersides, sterile supply units, and switchgear — without penetrating internal assemblies and without leaving chemical deposits on sensors or connectors. Manufacturer specifications still apply to internal components; dry ice complements these cleaning procedures rather than replacing them.

Switchgear and UPS systems in hospitals operate under strict continuity requirements; shutdown is often not possible. Dry ice can be applied during live operation — no dirty water, no condensation risk, no conductive cleaning agents near busbars or circuit breakers.

  • MRI and CT room equipment: housing surfaces and cable duct covers
  • Switchgear and UPS rooms — dry and without disassembly
  • Sterile supply — external surfaces and transport containers
  • Operating table undersides and maintenance penetrations
  • Elevator cabins and control panels during clinical operations

Laundry, catering kitchen, and internal logistics

Hospital laundries and catering kitchens face the same stubborn cleaning challenges as hotels — with the critical difference that hygiene audits under RKI guidelines and HACCP must be documented annually. Dry ice delivers cleaning results measurably cleaner by ATP bioluminescence than hot water or chemical cleaning alone, while generating no dirty water that would cause operational interruptions or require complex disposal.

Ironing machines, mangles, and tumble dryers in the laundry, combi steamers and grills in the kitchen, and stainless steel trolleys and containers in logistics — all can be cleaned residue-free with dry ice, without dismantling equipment or causing operational interruptions. Cleaning is immediately verifiable for the next audit, because CO₂ sublimates and nothing needs to be declared.

  • Ironing machines and mangles: lime and textile residue from rollers
  • Combi steamers, convection ovens, and grills without cleaning chemicals
  • Stainless steel trolleys and transport containers in sterile and meal logistics
  • ATP-measurably clean — hygiene audit without extra effort
  • No dirty water, no chemical disposal, no waiting time

In action

Ventilation & HVAC — hygiene cleaning without dismantling
Technical rooms and equipment surfaces — maintenance without water
Mobile cleaning service — on-site, without shutdown

Consultation

Sound like your application?

Tell us briefly what you need to clean — we will recommend the right machine and dry-ice quality.

Typical applications

  • Control cabinets, electronics

    Air
    400–700 l/min @ 4–7 bar
    Dry ice
    5–9 kg/h
  • Print rollers, printing presses

    Air
    450–700 l/min @ 4–7 bar
    Dry ice
    5–9 kg/h
  • Injection molds / tool cleaning

    Air
    700–1400 l/min @ 6–10 bar
    Dry ice
    9–18 kg/h

Next step

Let's talk about your application.

Tell us briefly what you need to clean — we will recommend the right blaster and put together a no-obligation quote.

Send a request

We’ll get back to you within 24 hours.

By submitting you agree that we may process your data to handle your request. See our privacy policy for details.